VIO S118R

ACTIVE BASSREFLEX SUBWOOFER

1600W RMS DIGIPRO® G4 AMPLIFIER

139 dB MAX SPL

USABLE BANDWIDTH [- 6 dB]: 32 Hz to cut frequency

DANTE & A2NET READY

LF: 1 x 18”, 4” v.c. - NEODYMIUM

Weight: 47Kg (103.62 lbs)

THE VIO COMPLEMENT FOR LOW FREQUENCIES

This active subwoofer’s acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations.

Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary. The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.

TECHNICAL DATA

Speaker Type    Active Bass Reflex Subwoofer

ACOUSTICAL DATA

Frequency Response [- 6 dB]    35 Hz to Cut Freq (X-Over Dependent)

Frequency Response [- 10 dB]    32 Hz

Max SPL    139 dB

LF    1x18"

Voice Coil LF    4 "

Directivity    Omnidirectional

AMPLIFIER

Amp Technology    Digipro® G4

Amp Class    Class D

RMS Power    1600 W

Peak Power    3200 W

Cooling    Convection + Internal Fan

Power Supply    Full-range PSU with PFC

PROCESSOR

Controller    DSP 32 Bit

AD/DA Converter    24 bit 96 kHz

Limiter    RMS, Peak, Thermal

Delay Option    0- 9.9 ms | steps of 0.1 ms [on-board]0 - 62 ms [via RDNet]

Crossover Frequency LF-HF    Selectable 60-110Hz + Full range

LF-Xover out slope    24 dB/Octave

1x Rotary Encoder (Delay 9.9 ms)    

1x Polarity Inversion Switch (0° or 180°)

1x Cardioid Mode Switch

1x X-Over Freq Switch (60-110 Hz + Full Range

1x System Auto-test

MECHANICS

Housing    Multiplex plywoodPolyurea painted

Handles    2x Per Side

AluminiumPole Mount    M20 Thread

Rain cover    Included

Width    720 mm (28.34 in)

Height    520 mm (20.47 in)

Depth    695 mm (27.36 in)

Weight    47 kg (103.62 lbs)